Wire | Hangers | Attachments

Form alterations have never been easier! Simply alter your manikin and reassemble with thee reusable screws. Foam together, remove screws, and rasp or sand the union. You can use them over and over. Each set comes with a hex head driver bit.  Easy &...

The perfect drill bit to add inserts or rods to all antlers. 5/16" Drill bit for the Antler Insert

This square stock is made from heavy duty steel and is an excellent method of attaching shed antlers to a manikin, or making detachable antlers on larger animals. Directions included. 1/4" x 4" : Small-Medium Deer 3/8" x 4" : Medium-Large Deer/Small...

Realistic habitats and dioramas are a vital part of taxidermy and will turn an ordinary mount into a work of art. What could be more realistic than a pheasant mount with an actual piece of rusted barbed wire wrapped around a fence post. Available in...

Acrylic rods are great for water scenes or for a clean look at exposed attachment points. Five different sizes available.  

65.6' 26 gauge

Phillips Flat Head 5/8" length. Ideal for lighter mounts like fish, birds and light heads.  Phillips Pan Head 3/4" length. Recommended for heavier mounts like deer and medium size heads.  

The same quality as an insertable hanger but in an economy model. Mounts hang flush to wall and are held by counter sink drywall screws.

This hanger is one of our favorites. It is a hanger which actually suspends your gamehead 1" away from the wall. By doing this, the hair as it wraps around the back, now goes straight to the wall and stops. No more hair burst effect when the customer...

Makes your mount stay where you want it, using screws with the mini and regular hangers and lag bolts for the magnum hangers. 

Heavy Duty Noose Hangers. Color may vary. Solid steel, zinc plated for rust protection. Just break in half to get two hangers for the average deer shoulder mount.

The Sportsman's Trophy Skull Hanger is a simple yet secure hanger to display finished skulls on the wall at an attractive angle. No need for an expensive wood panel. This hanger is available in three sizes and will display skulls from raccoon to elk size.

Ghost hangers were designed by Shane Smith to create a "no driftwood" approach for mounting single or multiple flying birds and fish. The hanger can be painted and cut to the desired length.

AK Hangers are premium heavy-duty dual hinge display brackets made right here in the USA. These brackets are the perfect choice for shoulder mounts of all shapes and sizes, offering your customer the ability to customize the angle of every mount in the...

Don’t hassle with small hardware pieces anymore. Hillman’s zinc plated hangers are designed for easy installation. Simply, place in desired location and use provided screws to secure in place. Great for hardwood. Screws included

Serrated teeth make adjusting the center of gravity as easy as moving your mount to the right or left a notch. Mini-mag is for birds, fish, and small game heads. Pro-mag is used for deer. Magnum can be used for bison, moose, or elk.

Extremely strong, easy to install, and gives a professional appearance. Suitable for driftwood, life-size, shoulder mounts and panels. Non-rusting, mounts flush against wall. Counter sink with a hole saw or Forstner bit. Small

How many times do you move your hangers from side to side to find true center on those large driftwood displays? No more guesswork with a Level Rite Hanger.

Add a touch of class & artistry to your showroom! Strong, durable and handsomely artistic, these solid metal displays are the perfect size and shape to feature any midsized taxidermy piece. From waterfowl to fish of any species, these beautifully...

A secure inconspicuous attachment is critical to quality taxidermy work. These connecting rods come with a hollow brass tube and a square steel rod that fits the tube perfectly. Simply cut to length and glue one part into the base and the other into...

This heavy duty square rod assembly is designed with the taxidermist in mind! These square stock assemblies come with mounting plates so pedestal bases can be easily secured to any base! Comes with a variety of sizes to accommodate every project. 12"...

Detachable antlers and pedestal attachements have never been easier or sturdier. Available in a variety of sizes to accommodate a wide range of projects. This square rod system is designed to prevent twisting and includes both heavy duty male and female...

Square stock is an excellent method of attachment for pedestal mount attachments. They can be either permanent or removable. Very rigid and wiggle free. Directions included.

Heavy-duty, easy to use threaded phillips head screws are essential for every taxidermist in day to day work. These durable screws work great for attaching manikins to mounting stands, skull plates, panels etc. Use with #2 drive bit.

Stainless steel mounting pins from Europe. Perfect for fish and bird taxidermy. Elongated plastic handle for easy manipulation and removal. Pins can be reused over and over. 0.50x50mm • 0.70x60mm • 1.0x130mm

The shoulder bracket allows full adjustability of your shoulder mounts with 2 hinges that lock in place. This is designed for deer and antelope size game.

If you are looking for an elegant, simple, and secure way to display your hunting trophies you need to try these American-made skull brackets. The Bull Bracket is the strongest European elk skull and other large game mounting bracket available for big...

A professionally finished European skull mounting bracket that's powder-coated and fully adjustable (up and down) to accommodate different species' horns or antlers with a natural upright look. Arm can swing both right and left taking advantage of all...

A simple inexpensive solution to attach birds, fish and gameheads to a pedestal or for detachable horns. Comes with a square insert at the end of a threaded rod and a female square tube. 

Your choice between natural nickel or a true 24-karat gold plate that will not tarnish and that gives this stringer the look and feel of solid gold. 46” long, with 8 hooks

These wires are an excellent help in positioning fish heads and aligning jaws. Use for fish as well as holding mammal ears in place while drying. Made out of galvanized wire to prevent rusting! Light Duty / 9" Medium Duty / 9" Heavy Duty / 11"

Works as a self-sustaining clamp that holds any irregular surface. Just wrap tightly around pieces to be foamed back together.   12' x 1/4"

Ideal for injecting bird feet with fluid, gluing hard to reach areas, etc. Not for human use!

Cotton/Polyester sewing thread is perfect for repairing holes in the fragile areas in the face, eyelids, and ears of mounts. Good for birds. 250 yard spool

These threaded rods make attaching the drumstick easier and quicker. No long set-up time. Comes in two sizes with nuts and washers included. Comes as a pair.

These decorative tacks will find many uses in the taxidermists shop from trim on antler mounts, base work as well as pedestal backs.

Take the guesswork out of figuring out wire sizes. With this inexpensive tool you can accurately determine the gauge of wire you are working with. Precisely measures wire sizes from 0 gauge to 36 gauge.

Annealed steel wire is much more pliable than the galvanized straight wire. Very easy to shape bird necks, legs and wings. Sold in 5 lb. roll.

Annealed wire sold in straight 48" sections, 1 lb. per bundle.     

Galvanized wire sold in straight 48" sections, 1 lb. per bundle.