Molding | Casting
-
Alginate (Molding Gel)
$19.50Easy to use, inexpensive, one-time use mold making material. Used for making reference casts such as noses, eyes, fish heads, bird heads, etc. Mixes easily with water and sets in minutes. 1 lb. Â Â060100- SKU:
- 060100
$19.50 -
Amazing Mold Putty
$20.95 - $63.50Amazing Mold Putty is an extremely easy to use 2-part silicone mold making putty that allows you to have a mold ready in under 20 minutes. Knead the two parts together, press in place, and let cure. Cure time is 20-30 minutes.$20.95 - $63.50 -
Bottles-Atomizer
$3.95 - $4.95For spraying bactericide, conditioner, water, coloring mache rocks with dye, etc. Â$3.95 - $4.95 -
Clear Scenery Resin
$33.50 - $89.95Use for water scenes, splashes, icicles or glass embedments for paperweights. Recommended six month shelf life. Catalyst included. Â$33.50 - $89.95 -
Eye Frisket
$6.50Works equally well on all glass, acrylic or flex eyes to protect eyes from paint. Clean brushes with soap and water. 2 oz. Freeze Warning170525- SKU:
- 170525
$6.50 -
Eye Protect
$9.50An eye protector that works on flex eyes and glass eyes alike. Paint on the lens, do the finish work, then peel it off. Water soluble. 2 oz. Freeze Warning170400- SKU:
- 170400
$9.50 -
Fantastic Cast
$39.95Injection Grade. Unique, low viscosity two-part casting resin. 1:1 mix ratio. Slow set time gives ample opportunity to inject bird feet, fish heads, and problem shrink areas. 8 oz. ÂFCIG- SKU:
- FCIG
$39.95 -
Hi-Low Wax Mold Release
$35.95A true, hard gloss, paste wax formulated with synthetic waxes and high heat resins for the effective release of most plastic parts through numerous cycles. Buffs to an ultra high gloss for easy separations. An excellent release between fiberglass on...081000- SKU:
- 081000
$35.95 -
Isokote Silicone Mold Release
$20.95Can be used with rigid, semi-rigid and flexible foams. When used with polyurethane foams it imparts a light, dry, coat to mold surface that will not build up and makes demolding a snap.  Â081116- SKU:
- 081116
$20.95 -
Molding Latex
$16.95 - $28.50Brushable rubber latex. Can be used for making rock molds as well as molding other animal parts. Latex molds can be used over and over without damage. Freeze Warning.$16.95 - $28.50 -
Paint-Life Tone | Basecoat Sealer
$8.95 - $48.95Excellent all around sealer. Inhibits growth of mold, mildew, and fungus. Outstanding adhesion and flexibility. May be blended with any color to achieve transparency.$8.95 - $48.95 -
Partall #2 Paste Wax
$13.50A wax-based compound that can also be used alone for the release of epoxies, polyesters and urethane foams. 12Â oz.081024- SKU:
- 081024
$13.50 -
Plaster (#1 Molding)
$21.95The best for reference casts, half-cast fish molds, base work, and just about anything else you can think of. 25 lbs.060220- SKU:
- 060220
$21.95 -
Plaster (Fish Casting) by Zehner
$26.50Reproduces the intricate details of a fish’s skin and scales without leaving a chalky residue. Also works for casting reptiles, open mouth casts and much more. 10 lbs.060810- SKU:
- 060810
$26.50 -
Polycast Super Casting Plastic
$36.95 - $124.95A superior casting plastic with a 4 minute work time and hardens in 8 minutes. Stays white and very strong for intricate castings. Perfect material for bird, fish heads and jawsets.Â$36.95 - $124.95 -
Premium Bedding Fiber
$24.95Anyone familiar with molding process knows the value of a quality bedding product. Simply mix with water to a desired consistency while using a trowel to create a perfect smooth parting shelf. Excellent for molding fish reproductions. Allow to dry and...062005- SKU:
- 062005
$24.95 -
Rapid Set for RTV Silicone Rubber
$19.95Dramatically speeds up the set time of RTV silicone rubber. Will gel in approximately 20 minutes. Directions are included. Product Instructions$19.95 -
Resin Dyes
$6.25 - $52.95Use these dyes to color your casting resin. Can be used in the water clear resin to make a translucent colored casting. Use the flesh tones according to your preference of shade (flesh tones are typically used in white to achieve the best results). 1 oz...$6.25 - $52.95 -
Resin Spray & Sealer (Clear)
$14.50A high gloss aerosol sealer or finish. May be used under Envirotex Polymer coatings or as a finish coat. Apply over-casting resin to remove tacky characteristics. Can be used to gloss fish and mammal noses. Previously known as EnviroTex Resin Spray. 12.5...080800- SKU:
- 080800
$14.50 -
RTV Silicone Molding Rubber
$9.50 - $219.95Easy to use molding rubber that allows you to make flawless molds on your own. Very high tensile strength and a long shelf life. Rubber and Catalyst have a 6 month shelf life in the unopened container.Â$9.50 - $219.95 -
Stir Sticks
$3.50 - $15.95Economical and disposable for all mixing jobs for epoxy, bondo, fillers, and maches. Sold in three sizes for your convenience.$3.50 - $15.95 -
Stoner Rapid Release Aerosol
$12.50Specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials. It provides a long lasting, thin-layer of anti-stick coating for fast, easy part removal from metal, plastic, rubber, and even silicone rubber...081008- SKU:
- 081008
$12.50